The Podium Browser Light Fixtures have now been completely updated.
Every light is now adequately calibrated with the manufacturer specifications; light output and bulb type.
Light output: Calibration where made from the 1.0 interior, we will make sure all other presets matches that, if it is not already done.
Just so you now:
100w incandescent = 0.7 OMNI Power
60w incandescent = 0.4 OMNI Power
Bulb Type: Every Fitting has a dynamic component option on witch you can chose the bulb type available for the specific fitting, and also turn it off.
-Incandescent (a more warmer light)
- Hight Pressure Sodium (yellow street light)
- Metal Halide (whiter)
- Cosmopolite (Warmer)
Again, it depends on what the real fitting has to offer.
The fixtures that will most likely be featured and not copied a 100 times have also their advanced material properties configured. Thats would be : Table, Floor and some ceilings. For the others, you can configure them to you likings.
If you want to modify them:
There are 2 types: OMNI and LEM
For onmi, the difference is that the light itself is in another component that has possibly the different colors. You will need to enter this component and modify the OMNI.
- Please note that if you change an Onmi, and then change the bulb type, changes will not be made to the other Light bulb.
For LEMs, sometimes you will have a big rectangle floating in mid air; it will disappear on render. Since its an LEM, light is managed by textures so you can modify it. They are generally fluorescent lights.
If you have any question please ask.
If you notice something wrong please report here.
P.S Big black holes are not a fixture problem, its an engine bug that will happen randomly. Please do not report them as fixtures misconfiguration.