SU Podium Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
ottoman

Registered:
Posts: 121
Reply with quote  #1 
3.png  4.png 
bigstick

Avatar / Picture

Moderator
Registered:
Posts: 11,011
Reply with quote  #2 
Really nice attention to detail! These are really good renders, excellent texturing and the lighting looks really natural.

The vertical slats between the desk and the kitchen look at bit strange though particularly at the base - are they correct? They would need to be at least 25mm thick in that arrangement if they are wood. Are we just seeing the flat edge?

Don't forget to use the Nudge tool to randomise the rotations and positions of things like the chairs.



__________________

That which does not kill us makes us stronger
-Friedrich Nietzsche

ottoman

Registered:
Posts: 121
Reply with quote  #3 
The bars are 18 mm thick. 5 cm wide oak boards. Each will be mounted 45 degrees horizontally. The separator is actually intended to be done here. As the office is rented, it will not be installed on the floor. Ceiling mounted operations will be performed. Today we have clarified the last details. The direction of entry to the kitchen will be made from the other side. The separator will turn oval in the waiting area. I'il share your final final. Thank you
bigstick

Avatar / Picture

Moderator
Registered:
Posts: 11,011
Reply with quote  #4 
I would really like to see completed photos!

Personally I think 18mm is a bit too thin for those verticals. They are quite long and they are likely to bend slightly in the middle at that thickness. 25mm timbers are almost 30% thicker which will make sure they are more straight and rigid.

It's your choice though [wink]

__________________

That which does not kill us makes us stronger
-Friedrich Nietzsche

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.