Originally Posted by bigstick
Are those the dynamic blinds I built for the browser? We also have a dynamic louvre panel too
Yes! they come from Podium Browser. I use a lot of things from PB cause this project is time limited.
I love scrutinising your images, because the attention to detail is so amazing! You are pushing the envelope and getting closer and closer to proper photorealism, and every render you produce I try to find any little thing that isn't quite perfect, it's like a challenge for me
Unfortuantely it's getting harder and harder.
Because I try to adjust every small details that you mentioned.
This time, it's skirting/base boards at the bottom of the walls, and the vertical connections of the furniture with the wall.
The skirting/base boards are normally fitted for a couple of reasons. Getting the plaster finish right the way down to the floor perfectly accurately and with perfect corners is difficult because they are different materials applied at different times.
Getting the floor finish cut perfectly to the walls is also difficult. The boards at the base allow a little tolerance to cover the imperfections and inaccuracies.
Wooden or even laminate-faced floors need a small gap around all the edges to allow for movement and expansion. This gap is hidden under those boards.
If you look at where the edge of the bed meets the wall, there is absolutely no gap at all. In reality what would happen would be that the bed would be either brought into the room assembled and moved into place (there is no space for that here) or assembled in place.
Even manoeuvring those long sections of wood into place with very little space will be difficult, so you need to leave a gap for tolerance. The smallest that would be would be 5mm.
Yeah~ you are right!
It will be more perfect to do that.
I should use nudge tool to do slight movement next time.
I'm not familiar with construction in Taiwan, but you also don't have any window cills. If the window is completely flush with the wall face that's okay, but it's pretty rare in my experience. It's much more common for the window to be flush with the outside face. This generally leaves a horizontal surface for the cill. This isn't usually plastered, because it's not durable enough, so it's going to be plastic or painted wood or tiled.
True! I'm just too lazy to do that.
But it does a good detail I need to do.
It's these little details and imperfections that make the difference.
So - fantastic work as usual, but only 90% this time